노턴 A275 6인치 노필 아달록스 노그립 연마 디스크 6 진공 구멍 경량 용지 뒷면

제품 설명

• P-graded aluminum oxide abrasive is durable, and offers a very consistent scratch pattern for the best finish
• Hook and loop fastener is easy to use and makes disc changes fast
• Lightweight paper backing can be used wet or dry
• Vacuum abrasive discs have holes to allow the vacuum sander to pull dust and debris away from the workpiece and sander operator
• This disc is used with a molded rubber or foam back-up pad (sold separately)
• Premium heat-treated grain provides 30-50% faster cut rate and extended life
• Premium B-weight latex fiber re-enforced paper backing is tear resistant, more flexible and provides easier disc removal

This disc is used for preparing primed and painted surfaces, sanding plastics and fiberglass, and bare wood sanding.Coated abrasives have individual abrasive grains spaced at a predetermined distance from one another. This disc is open-coat. An open coat covers about 50 to 70 percent of the coated surface with abrasive, for greater flexibility and resistance to clogging than a closed coat, which has 100 percent grain coverage. An open coat allows for longer usage time by clogging less, while a closed coat offers a finer surface finish than an equivalent open-coat abrasive. High-strength, fiber-reinforced B weight (paper is classified from A to F weight, F being the heaviest and least flexible) is strong, reducing edge wear during use. This disc is suitable for use with a die grinder or orbital sander. Use with molded rubber back-up pads on a grinder, using a hard pad for aggressive cutting, a medium pad for general purpose applications, or a soft pad for contours and fine finishing work. Or, with a random orbital sander, use a foam back-up pad to match the application. Foam pads come in different combinations of shape and density for finer or more aggressive work. For example, use a low profile for uniform contact with the work surface, a tapered edge for small contours or inside corners, soft density for 320 grit and finer sanding, or medium density for grits coarser than 320.

This six-inch diameter disc has six vacuum holes. Ensure that the holes on the disc are lined up with the holes on the backing pad, in order to properly draw the debris and dust away from the workpiece.

Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing. P-graded abrasive grains are held to a closer tolerance than non-P-graded abrasives, which means that they offer a more consistent surface finish.

Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.

Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.

제품 세부 정보 및 주요 사양

제품 애플리케이션